Also known as a Part J report , the energy efficiency requirements for a Class 3, 5, 7, 8 and 9 building is determined by Section J of Volume One of the National Construction Code (NCC) or Building Code of Australia (BCA). Section J Method of Compliance is used when there is enough Evidence of Suitability method using the Deemed to Satisfy (DtS) Provisions of Part J of the Energy Efficiency section of the NCC Volume 1 have been chosen as the most appropriate method to assess the compliance of the proposed development. In most cases, a report describing compliance with Section J is required before a construction certificate is issued.

The Building Code of Australia requires that Section J reports to be prepared using Deemed-to-Satisfy (DtS) provisions and verification using a reference building (JV3) verification methodology.

Green Energy Assessment team are expert in preparing section J Compliance Reports using both deemed-to-satisfy (DTS) and verification using a reference building (JV3) methodologies.

BASIX is short for Building Sustainability Index. It was introduced by the NSW Government to ensure that homes are designed to use less potable water and be more energy efficient. To do this, it sets targets for houses and units.
BASIX is an online tool, anyone can complete the forms, however only an accredited assessor can undertake a thermal performance assessment using computer simulation. Such a simulation is required for multiple unit projects and highly recommended for single dwelling sunless very simple.

Green energy engineers will attend your site and review the existing building services and provide an energy audit report, this report include all building services energy consumption and recommendations to improve the efficiency throughout the building.

We have preliminary, design development and construction stage for all our building services design. All our documents are fully coordinated and meet specific requirement of your project. We help our client in the construction stage via high quality shop drawings and helping contractor with their RFIs and engineering needs.